ここから本文です
TWO:"I don't think you are," Ren said, with grudging admiration. "Do you know how I got here? We lured Balmayne into a trap under the idea that he was going to meet Ghetti, and I frightened your address out of him. He betrayed you.""Who are you?"
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:Trip-hammers employed in forging bear a close analogy to, and were no doubt first suggested by, hand-hammers. Being the oldest of power-forging machines, and extensively employed, it will be proper to notice trip-hammers before steam-hammers.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:The One cannot, properly speaking, be an object of knowledge, but is apprehended by something higher than knowledge. This is why Plato calls it ineffable and indescribable. What we can describe is the way to the view, not the view itself. The soul which has never been irradiated with the light of that supreme splendour, nor filled with the passionate joy of a lover finding rest in the contemplation of his beloved, cannot be given that experience in words. But the beatific vision is open to all. He from whom it is hidden has only himself to blame. Let him break away from the restraints of sense and place himself under the guidance of philosophy, that philosophy which leads from matter to spirit, from soul to Nous, from Nous to the One.There is nothing more interesting, or at the same time more useful, in the study of mechanics, than to analyse the action of cutting machines or other machinery of application, and to ascertain in examples that come under notice whether the main object of a machine is increased force, more accurate guidance, or greater speed than is attainable by hand operations. Cutting machines as explained may be directed to either of these objects singly, or to all of them together, or these objects may vary in their relative importance in different operations; but in all cases where machines are profitably employed, their action can be traced to one or more of the functions named.
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:"Go on, darling. I promise you not to laugh again."Machine-drawing may in some respects be said to bear the same relation to mechanics that writing does to literature; persons may copy manuscript, or write from dictation, of what they do not understand; or a mechanical draughtsman may make drawings of a machine he does not understand; but neither such writing or drawing can have any value beyond that of ordinary labour. It is both necessary and expected that a draughtsman shall understand all the various processes of machine construction, and be familiar with the best examples that are furnished by modern practice.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:She took it from her pocket and held it out. There were a few drops of amber-hued liquid inside. Hetty would have removed the stopper, but Lawrence grabbed it.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.